|
|
Post by deguowner1234 on Dec 17, 2017 11:45:33 GMT
Hi I was thinking about joining 2 thicket cages(from pets at home) together for my goos, could someone send me some images of what they did and explain how they did it?
Thanks x
|
|
|
|
Post by bouncy on Dec 17, 2017 23:43:40 GMT
Are you trying to join horizontally or vertically? I've joined other cages together before, but not Thickets.
If vertical, take the top opening off, put the second cage on top, and make an opening in the tray for access. Hold the cages together with wire. You will likely need gloves and pliers for the wire, and pull it tight!
If horizontal, remove one panel from each cage, then use wire to "sew" the two two open ends together. Again, use gloves and pliers, and make sure you pull the wire tight!
Any gap bigger than 2cm (or less for youngsters) is an escape route for a goo, so make sure it's secure!
|
|
|
|
Post by moletteuk on Dec 18, 2017 11:18:28 GMT
If you type the words thickets join wire cut into the 'with all the words' box of the search page, you will get a page of results to browse through. I'm struggling to come up with any photos for you since we lost quite a lot of photos when photobucket went crazy, there must be some though, I've gone through the 'show us your cage' thread from p0 to 16 if you want to continue looking through there deguworld.proboards.com/thread/6918/show-cage?page=16 |
|
